Outcomes
In order to successfully complete this course, the student will:
1. Describe the purpose of wall insulation and flashing.
2. Identify the types and parts of common cornices.
3. Describe or demonstrate the installation of selected common cornices.
4. Demonstrate lap and panel siding estimating methods.
5. Describe the types and applications of common wood siding:
5a. Beveled
5b. Tongue-and-groove
5c. Shiplap
5d. Board-and-batten
5e. Shake or shingle
5f. Plywood
5g. Hardboard and particleboard
6. Install selected types of wood siding.
7. Describe fiber-cement siding and its uses.
8. Describe or demonstrate the installation of fiber-cement siding.
9. Describe the types and styles of vinyl and metal siding.
10. Describe how to install selected types of vinyl or metal siding.
11. Describe the types and applications of stucco and masonry veneer finishes.
12. Describe the types and applications of special exterior finish systems.
13. Describe the types and styles of gutters and downspouts and their accessories.
14. Install selected types of metal or vinyl gutters and downspouts.
15. Identify the materials and methods used in roofing.
16. Explain the safety requirements for roof jobs.
17. Install fiberglass shingles on gable and hip roofs.
18. Close up a valley using fiberglass shingles.
19. Explain how to make various roof projections watertight when using fiberglass shingles.
20. Complete the proper cuts and install the main and hip ridge caps using fiberglass shingles.
21. Lay out, cut, and install a cricket or saddle.
22. Install wood shingles and shakes on roofs.
23. Describe how to close up a valley using wood shingles and shakes.
24. Explain how to make roof projections watertight when using wood shakes and shingles.
25. Complete the cuts and install the main and hip ridge caps using wood shakes/shingles.
26. Demonstrate the techniques for installing other selected types of roofing materials.
27. Describe the requirements for insulation.
28. Describe the characteristics of various typesof insulation material.
29. Calculate the required amounts of insulation for a structure.
30. Demonstrate the installation of selected insulation materials.
31. Describe the requirements for moisture control and ventilation.
32. Install selected vapor barriers.
33. Describe various methods of waterproofing.
34. Describe air infiltration control requirements.
35. Install selected building wraps
Contact on-campus instructor for required textbook.
The student is expected to furnish basic carpentry hand tools:
1 Safety Glasses
2 Tool Belt/Suspenders/Nail Bag
3 Tool Box
4 Hammer (Straight Claw)
5 25' Tape Measure
6 Utility Knife
7 Utility Pry Bar
8 Chisel Assortment
9 48" Level
10 Combination Square
11 Framing Square
12 Screwdriver Assortment
13 Nail Set
14 Chalk Line
15 Pliers
16 Coping Saw
During this course, the student should expect to be exposed to various tools, materials, substances, and liquids that are used in the construction industry. These products may be hazardous if handled improperly. The student is required to follow established safety procedures and to consult Material Safety Data Sheets (MSDS) when necessary. The student must contact the instructor for guidance before using unknown materials or tools in class or on the work site. The student is required to possess basic personal safety equipment including eye and hearing protection and to wear shirts, long pants, supporting/protective footwear, and other clothing necessary to work safely at a construction shop/worksite. Failure to come to class prepared or failing to follow safe work procedures may result in summary dismissal from class.